鍍鋅方管是一種經過了鍍鋅處理的方管產品，整體的抗腐蝕能力比較強，防護效果比較高，主要使用在需要的機械制造和電力工程等領域。那么您知道該產品的堆放要求嗎？就先讓濟南鍍鋅方管廠家的小編帶您來簡單了解一下吧。

Galvanized square tube is a kind of galvanized square tube products, the overall anti-corrosion ability is relatively strong, the protection effect is relatively high, mainly used in the field of mechanical manufacturing and power engineering. Do you know the stacking requirements of this product? Let Jinan galvanized square tube manufacturers of small braid you to understand it.

濟南鍍鋅方管

Jinan galvanized square pipe

(1)堆碼的原則要求是在碼垛穩固、安全的條件下，做到按品種、規格碼垛，不同品種的材料要分別碼垛，防止混淆和相互腐蝕；

(1) The principle of stacking is to stack according to varieties and specifications under the condition of stable and safe stacking. Different kinds of materials should be stacked separately to prevent confusion and mutual corrosion;

(2)禁止在垛位附近存放對鍍鋅方管有腐蝕作用的物品；

(2) It is forbidden to store articles with corrosive effect on galvanized square pipe near stacking position;

(3)垛底應墊高、堅固、平整，防止材料受潮或變形；

(3) The bottom of the stack shall be padded high, firm and flat to prevent the material from moisture or deformation;

(4)同種材料按入庫先后分別堆碼，便于執行先發的原則；

(4) The same kind of materials are stacked separately according to the warehousing sequence, which is convenient to implement the principle of "first in first out";

(5)露天堆放的型鋼，下面需要有木墊或條石，垛面略有傾斜，以利排水，并注意材料安放平直，防止造成彎曲變形；

(5) For the section steel stacked in the open air, it is necessary to have wood cushion or strip stone under it, and the stacking surface is slightly inclined to facilitate drainage, and pay attention to the straightness of material placement to prevent bending deformation;

(6)堆垛高度，人工作業的不超過1.2m，機械作業的不超過1.5m，垛寬不超過2.5m；

(6) The stacking height shall not exceed 1.2m for manual operation, 1.5m for mechanical operation and 2.5m for stacking width;

(7)垛與垛之間應留有合適的通道，檢查道一般為O．5m，出入通道視材料大小和運輸機械而定，一般為1.5～2．Om；

(7) There should be a suitable passage between the stacks. The inspection channel is generally 0.5m. The access channel depends on the material size and transportation machinery, generally 1.5-2.0m;

(8)垛底墊高，若倉庫為朝陽的水泥地面，墊高O．1m即可；若為泥地，須墊高O．2～0.5m。若為露天場地，水泥地面墊高O·3～O·5m，沙泥面墊高0.5～O．7m 9)露天堆放角鋼和槽鋼應俯放，即口朝下，工字鋼應立放，鍍鋅方管的I槽面不能朝上，以免積水生銹。

(8) If the warehouse is cement floor in Chaoyang, it can be padded by 0.1M; if it is muddy ground, it must be raised by 0.2-0.5m. If it is an open field, the cement floor should be padded with 0.3-0.5m, and the sand and mud surface should be padded 0.5-0.7m 9) the angle steel and channel steel should be placed downward, that is, the I-beam should be placed vertically, and the I-channel surface of the galvanized square pipe should not face upward to avoid ponding and rusting.

以上就小編為大家介紹的關于濟南鍍鋅方管的存放的原則，希望可以幫助到大家，如需更多的知識內容，請關注公司網站;http://m.qianhairuiben.com

The above is a small part of the introduction of Jinan galvanized square tube storage principles, hoping to help you, if you need more knowledge, please pay attention to the company's website; http://m.qianhairuiben.com