現在很多工廠都有使用彩鋼瓦搭建敞篷，由于它具有很好的防水效果，在很多地區都比較受歡迎，接下來就為大家詳細介紹一下彩鋼瓦的相關使用以及計算規則內容吧。

At present, many factories use colored steel tiles to build cabriolets. Because of its good waterproof effect, it is popular in many regions. Next, let's give you a detailed introduction to the use of colored steel tiles and the content of calculation rules.

濟南彩鋼瓦的相關組成

Related components of Jinan color steel tile

1、鋼屋架、鋼網架

1. Steel roof truss and steel grid

(1)鋼材重量按設計圖紙所示尺寸計算，不扣除開孔、切邊、肢切重量，不增加焊條、鉚釘、螺栓重量。

(1) The steel weight shall be calculated according to the dimensions shown in the design drawings, without deducting the weight of opening, trimming and limb cutting, and without adding the weight of welding rod, rivet and bolt.

(2)不規則或多邊形鋼板，按其外部規則矩形面積計算。

(2) Irregular or polygonal steel plate shall be calculated according to its external regular rectangular area.

(3)鋼網架結構應分為球面連接、鋼板連接等形式。

(3) Steel grid structure shall be divided into spherical connection, steel plate connection and other forms.

(4)測量單位為t。

(4) The unit of measurement is t.

2、鋼支架、鋼桁架

2. Steel support, steel truss

(1)鋼材重量按設計圖紙所示尺寸計算。不得減少開孔、切邊、臨邊的重量，不得增加焊條、鉚釘、螺栓的重量。

(1) The steel weight shall be calculated according to the dimensions shown in the design drawings. It is not allowed to reduce the weight of opening, trimming and edge, or increase the weight of welding rod, rivet and bolt.

(2)不規則或多邊形鋼板，按其外部矩形面積計算。

(2) Irregular or polygonal steel plate shall be calculated according to its external rectangular area.

(3)測量單位為t。

(3) The unit of measurement is t.

3、鋼柱、鋼梁

3. Steel column and steel beam

(1）鋼材重量按設計圖紙所示尺寸計算。不得減少開孔、切邊、臨邊的重量，不得增加焊條、鉚釘、螺栓的重量。

(1) The steel weight shall be calculated according to the dimensions shown in the design drawings. It is not allowed to reduce the weight of opening, trimming and edge, or increase the weight of welding rod, rivet and bolt.

不規則或多邊形鋼板，按其外部矩形面積計算。

Irregular or polygonal steel plate shall be calculated according to its external rectangular area.

它包括實心腹板柱、空心腹板柱、鋼管柱、鋼梁和鋼吊梁。測量單位是t。

It includes solid web column, hollow web column, steel pipe column, steel beam and steel hanging beam. The unit of measurement is t.

(2)鋼柱上的帶箍應計入鋼柱的作業量。

(2) The band hoop on the steel column shall be included in the work volume of the steel column.

(3)鋼管柱上的扣板、加勁環、襯管、支架等應計入鋼管柱的工程量。

(3) The gusset plate, stiffening ring, lining pipe, support, etc. on the steel pipe column shall be included in the quantities of the steel pipe column.

(4)根據設計設置鋼制動梁、鋼制動桁架和汽車制動器時，應將其數量計入鋼起重機梁中。

(4) When the steel brake beam, steel brake truss and automobile brake are set according to the design, their quantities shall be included in the steel crane beam.

4、異形鋼板地板、墻板

4. Special shaped steel plate floor and wallboard

異形鋼板地板:根據設計圖尺寸和鋪設平面投影面積計算，不扣除0.3m2內的立柱、煙囪、孔洞面積。測量單位是m2。

Special shaped steel plate floor: calculated according to the size of the design drawing and the projected area of the laying plane, the area of columns, chimneys and holes within 0.3m2 shall not be deducted. The unit of measurement is m2.

異形鋼板墻板:根據設計圖尺寸和鋪設面積計算。不扣除0.3m2以內的孔洞面積，不單獨計算角落、邊緣、窗臺閃蒸面積。測量單位是m2。異形鋼板樓板應澆筑鋼筋混凝土，混凝土及鋼筋按混凝土及鋼筋混凝土中有關規定計算。

Special shaped steel plate wallboard: calculated according to the size of the design drawing and the laying area. The hole area within 0.3m2 shall not be deducted, and the flash area of corners, edges and windowsills shall not be calculated separately. The unit of measurement is m2. The special-shaped steel plate floor shall be poured with reinforced concrete, and the concrete and reinforcement shall be calculated according to the relevant provisions of concrete and reinforced concrete.

5、鋼構件

5. Steel member

濟南彩鋼瓦工程的計算規則:

Calculation rules for Jinan color steel tile project:

(1)鋼材重量按設計圖紙所示尺寸計算。如鋼支架、鋼檁條、鋼吊頂框架、鋼墻框架(包括柱、梁、連桿)、鋼平臺、鋼走道、鋼欄桿、鋼漏斗、鋼支架、零星鋼構件等。不得減少開孔、切邊、臨邊的重量，不得增加焊條、鉚釘、螺栓的重量。

(1) The steel weight shall be calculated according to the dimensions shown in the design drawings. Such as steel supports, steel purlins, steel ceiling frames, steel wall frames (including columns, beams and connecting rods), steel platforms, steel walkways, steel railings, steel funnels, steel supports, sporadic steel members, etc. It is not allowed to reduce the weight of opening, trimming and edge, or increase the weight of welding rod, rivet and bolt.

(2)不規則或多邊形鋼板，按其外部矩形面積計算。測量單位是t。

(2) Irregular or polygonal steel plate shall be calculated according to its external rectangular area. The unit of measurement is t.

(6)金屬網

(6) Metal mesh

根據濟南彩鋼瓦工程設計圖紙尺寸進行面積計算，包括生產、運輸、安裝、油漆等。

The area is calculated according to the dimensions of Jinan color steel tile engineering design drawings, including production, transportation, installation, painting, etc.

以上就是今天為大家介紹的關于濟南彩鋼瓦的相關使用以及計算規則的相關內容，希望對大家能有所幫助，想要了解更多內容可以電話聯系我們或者關注我們的網站m.qianhairuiben.com。

The above is the relevant content about the use and calculation rules of Jinan color steel tile introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website www.jnhxtcg com。